Surfaces which contacts directly with water are made of A304 stainless steel
Outer parts of the machine where there is no contact with water is HRP quality steel
300 litre capacity stainless steel water tank
Specially designed water tank discharge and overflow system
Staple type, vibration free brushes for ɛ =0.10 quality Low-E glasses
For each conveyor separate motor
Chain transfer system in conveyor systems
Emergency stop button on each conveyor
Special design for bearing system
Bearing housings aluminium
Special design for conveyor wheels to move heavy glasses
Wiper rubbers and brushes between the section in the washing unit
EPDM and polyurethane conveyor discs, transparent acrylic inner cover
Stepless adjustable feed in washing section
Standard for 2500 mm height and 6 brushes machine each brush has separate motor, othermachines with 2 motors (for other dimensions optional for each brush motor)
On panel press lines 6 balanced brushes are offered as standard in the washing unit.
Low-e glass washing
Washing and rinsing with thermostat controlled hot water
Brush shafts are balanced against vibration
Brush and executive bearing system that does not require lubrication
Rinsing unit
Drying unit with noise isolation and fan cabinet with heat control
Conveyor system without touching to side carrier wheels at drying section
Adjustable speed control
Ability of drying without touching the glass
Washing with hot water and drying with hot air
Automatic water adding with float-valve system
Water compartments corresponding to each washing division in the water tank
Inlet filters for water pumps
Water level control with magnetic safety sensors
Temperature controlled stainless water tank
Low energy consumption
User friendly control panel
By-pass button for washing glasses with big sizes
Possibility to work from left to right or from right to left
Vertical roll pressing system
Double glass pressing
Transfer of double glass by transferring between vertical pressing rolls
By forward-backward-moving lath placement bench
Photocellsstop safety on the glass exit wall
Lighting system for quality control
Abrasion resistant consumable material
Electrostatic powder coating systems against corrosion
Using of well-known quality brand system in electricity (Siemens, Schneider, Lenze, Omron) it is compliant with general safety rules

OPTIONS
- Prewashing Unit
- Open Top
- Valve system for energy saving when there is no glass in drying unit
- Control with electronic float in water tank
- Flap System in Blower
- Heating Resistance System in Blower
- Front first brush hard and movable
- Washing cabin complete stainless
- Processable Glass Thickness max. 2-50 mm
- Pneumatic Tilting Table at the exit
- Motor rack and plc system according to glass thickness
- Possibility to make triple glass
- Super spacer application section